DrivEn Zone Technology DrivEn Zone Technology is both a scientific and ideological concept created to define the EnZo Golf Shaft brand.  Quality, Performance, and Perfection were the words chosen by the company founders to further illustrate our DrivEn Zone standards.  Basically, our goal is to provide our customers with a no non sense approach to manufacturing and marketing our golf shafts.  Through innovation in the latest technology, the use of state-of-the-art manufacturing processes, implementing only the highest level of modulus materials for use in all shafts, together, creates an unbreakable desire to provide our customers with the highest degree of integrity and honesty.  We believe all this will drive EnZo Golf Shafts to the top of the industry.   FILAMENT WINDING All EnZo Golf Shafts are fabricated using a filament winding technique.  Our process involves winding filaments under varying amounts of tension over a male mould or mandrel. The mandrels rotates while a carriage moves horizontally, laying down fibers in the desired pattern of our choice.  Each EnZo Shaft uses only high modulus filaments, consisting of carbon fibers that are coated with synthetic resin, and  or Nano fillers, as they are wound. Once the mandrel is completely covered to our desired thickness, the mandrel is placed in an oven to solidify (set) the resin. Once the resin has cured, the mandrel is removed, leaving the hollow EnZo Golf Shaft ready for paint and graphics. Using our filament winding process allows our company unlimited design and playability options.  As apposed to “table rolled” or “pre-preg rolled” shafts, our fabrication method demonstrates virtually no shaft “spine”.  This means our shafts are stronger, can be built lighter, and have less shaft deformation while in use.  All this translates into a faster shaft recovery through the hitting zone providing optimal consistency and greater distance.   NANO COMPOSITE EnZo Golf implements Nano composite material in its extremely accurate Nano-pipeiron shafts (with future models to come).  The Nano composite application process consists of adding a nano treatment during the filament winding process. This treatment allows for a greater surface area of fibers, creating fewer voids in the fiber, for more strength, durability, and consistency for all users of this shaft.  Because this material is used for our graphite iron shafts, it means our customer can be assured the same durability and consistency of a steel shaft but with the added playing advantage of a lighter overall feel and increased distance. Example of shaft without Nano Shaft with Nano